CO2 welding automatic trolleys are widely used in ships, bridges, locomotives, steel structures, petrochemicals and other industries. They are suitable for welding a variety of welding structures, such as: welding of stiffened plates, ribs, intersections, welding of box beams, etc. wait. Its main advantages are:
- Reduce labor intensity and improve the working environment.
- Improve work efficiency, which is 1.5 times that of manual welding.
- Avoid poor weld quality caused by human factors. Generally, the defective rate of manual operation is about 20%. , and the use of automatic welding trolleys has no welding defect rate, so its comprehensive benefits are nearly 200% higher than manual welding.
- High degree of automation, ensuring the stability of welding quality.
- No need for very skilled technical workers.
The KA-H5w side suction-hanging automatic welding car is modified on the basis of the KA-H5-side suction automatic welding car. It is mainly used for narrow and small H-shaped steel, and the box-shaped beam corner weld. Side -sucking method is suitable for certain special welding forms.
Features
(1) KA-H5W is an automatic device for side suction horizontal welding
(2) The swing speed, swing range, center position and left and right stays can be adjusted, suitable for various specifications of welding channels.
(3) Install a permanent powerful magnet to prevent the car from falling off during welding. The permanent powerful magnet can also prevent the car damaging accident caused by the loss of the electromagnet loss during power outages.
(4) It is suitable for the corner welding of the box beam, with a small size, light weight, walking without track and convenient movement. In addition, it can be moved in the tilt surface and narrow space.
(5) The drive wheel itself is designed to towards the welding site. The bottom of the car is equipped with a friction limit wheel to better ensure that the car is walking along the welding line. The side suction type installation method is suitable for some special welding forms.
Applicable environment
(1) Suitable for horizontal fillet welding
(2) Box-shaped I-beam and H-shaped steel parts outer wall welding
(3) Suitable for I-LIB, T-BAR welding
Product Structure Introduction
1.X-Y slider: adjust the position of the welding gun
2. Oscillator: drives the welding gun to perform pendulum-style swing welding
3. Welding gun clamp: The clamping device of the welding gun can adjust the angle of the welding gun.
4. Guide wheel: a device that guides the car along the welding line
5. Driving part: The power device for the trolley to travel, consisting of four rubber wheels, helical gears, chains, and sprockets.
6. Control box; all movements of the car can be adjusted. For details, please refer to the control panel operation method.
7. Barrel holder: used to fix the barrel
1) Welding/non -welding" switch: Enter the welding preparation status when selecting the "welding" position, and press the "start" switch for welding; press the "start" switch when the "non -welding" position is selected. Essence
(2) Start" switch: The switch is turned on and the car starts to walk. The welding "position is only walking but not welding.
(3) Stop" switch: If you press the stop switch during the trips of the car, all the actions will stop.
(4) Up Down: You can choose to walk up or down.
(5) Walking speed: The speed value is displayed in digital, the maximum walking speed is 1040mm/min, and the digital display value is 999.
(6) Switching speed adjustment knob: Rotate the swing swing speed in clockwise, the maximum value is 1520mm/min. The maximum scale is 10.
(7) swing range: The amplitude of the swing of clockwise rotation increases, and the maximum value is 20mm. The maximum scale is 10.
(8) Stop time adjustment knob: The adjustment range is 0 ~ 2S, and clockwise increases.
(9) Right stop time adjustment knob: The range is 0 ~ 2s, and clockwise increases.
(10) left right center moving: When rotating clockwise, the center will move to the right, and the center will move to the left when the clockwise rotation counterclockwise, and the maximum range of movement is ± 5mm. The maximum scale value is represented by scale value.
(11) swing choice: Use this knob to select the swing mode. There are five types of swing mode of the car. Except for the first one is the non -swing mode, the rest is as follows:
| Items |
Event item |
Instructions |
| Dolly |
Walking method |
Four-wheel drive |
|
Range of torch adjustment |
Vertical orientation |
55mm |
| Horizontal orientation |
55mm |
| Job Angle adjustment range |
360 ° |
| Make the Angle adjustment range |
0 ° |
Exterior
dimensions |
350mm× 350mm×400mm |
L× W ×H |
| Weight |
16Kg |
Wiggler included |
| Magnet suction |
60Kg |
Permanent magnet |
| Motor matters |
DC24V 18RPM |
|
Control
box |
Adjustment
function |
Power supply ON/OFF selection; Power light |
|
| Welding/non-welding options |
|
| Walk starts; Walking stops; |
|
| Walking direction selection |
Left or right |
| Walking speed adjustment |
0~1200mm/Min |
| Swing speed adjustment |
0~30RPM |
| Swing amplitude adjustment |
0~30mm |
| Left and right residence time adjustment |
0~2s |
| Swing mode selection: |
|
| Use power |
AC110-220 |
Optional lithium DC24V |
1.Q:Are you a factory or trading company?
A, Yes we are the trading company,but we have a lot of factories that have cooperative relationships, and we can get the best plan and price for you.
2.Q:Does the machine have CE certificate?
A:Yes, others certifications also can be sent
3.Q:What's the shipping method?
A: International express and sea transportation,Depend on customer.
4.Q:Can I use my own forwarder to transport the products for me?
A:Yes, if you have your own forwarder in China, you can let your forwarder ship the products for you.
5.Q:What's the Payment method?
A:T/T,L/C and other payment method, Depend on customer.
6.Q: What is our payment term?
A:We can accept the payment by T/T and Trade assueance .
7.Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine.
8.Q: How can I know your machine works well?
A: Before delivery, we shall test the machine working condition for you.And we warmly welcome you to China for inspection.
9.Q:How to Place an order?
A:Please kinldy send us your order by email,we will confirm the PI with you .we wish to know the below:your details address,phone/fax number,destination,transportation way ;Product informaiton:item number,size,quantity,logo,etc.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}