CO2 welding automatic trolleys are widely used in ships, bridges, locomotives, steel structures, petrochemicals and other industries. They are suitable for welding a variety of welding structures, such as: welding of stiffened plates, ribs, intersections, welding of box beams, etc. wait. Its main advantages are:
- Reduce labor intensity and improve the working environment.
- Improve work efficiency, which is 1.5 times that of manual welding.
- Avoid poor weld quality caused by human factors. Generally, the defective rate of manual operation is about 20%. , and the use of automatic welding trolleys has no welding defect rate, so its comprehensive benefits are nearly 200% higher than manual welding.
- High degree of automation, ensuring the stability of welding quality.
- No need for very skilled technical workers.
Features
(1) KA-He9 is a swinging automatic welding device, which can obtain wider welded seams in one welding.
(2) The swing speed, swing range, center position and left and right stays can be adjusted, suitable for various specifications of welding channels.
(3) Installed a magnetic control handle, the installation is convenient to the middle.
(4) Installation with sensor stop switch. When welding to the end of the workpiece, it can be automatically stopped working, so that one person can operate multiple devices
(5) Small volume, light weight, convenient installation, non -skilled workers can also be welded.
(6) Install a permanent magnet to avoid welding line away from welding.
(7) The control device can be disassembled for remote control and is magnetic, which can be placed on various workpieces, which is very convenient to use.
Product Structure Introduction
(1) Swinger: Drive the welding torch for clock swinging welding
(2) Drive part: The power device for walking in the car consists of four rubber wheels and oblique gears, chains, and sprockets
(3) X-Y slider part: The device that regulates the welding torch, which can be fine-tuned in the welding
(4) Welded fixture: The holding device of the weld can adjust the angle of the welding gun.
(5) Guidance wheel: guide the device where the car is walking along the welding line
(6) Control box; you can adjust all the actions of the car, refer to the operation method of the control panel in detail
1) Welding/non -welding" switch: Enter the welding preparation status when selecting the "welding" position, and press the "start" switch for welding; press the "start" switch when the "non -welding" position is selected. Essence
(2) Start" switch: The switch is turned on and the car starts to walk. The welding "position is only walking but not welding.
(3) Stop" switch: If you press the stop switch during the trips of the car, all the actions will stop.
(4) Up Down: You can choose to walk up or down.
(5) Walking speed: The speed value is displayed in digital, the maximum walking speed is 1040mm/min, and the digital display value is 999.
(6) Switching speed adjustment knob: Rotate the swing swing speed in clockwise, the maximum value is 1520mm/min. The maximum scale is 10.
(7) swing range: The amplitude of the swing of clockwise rotation increases, and the maximum value is 20mm. The maximum scale is 10.
(8) Stop time adjustment knob: The adjustment range is 0 ~ 2S, and clockwise increases.
(9) Right stop time adjustment knob: The range is 0 ~ 2s, and clockwise increases.
(10) left right center moving: When rotating clockwise, the center will move to the right, and the center will move to the left when the clockwise rotation counterclockwise, and the maximum range of movement is ± 5mm. The maximum scale value is represented by scale value.
(11) swing choice: Use this knob to select the swing mode. There are five types of swing mode of the car. Except for the first one is the non -swing mode, the rest is as follows:
| Types |
Content |
Remarks |
| Buggy |
Power supply |
AC 220 or 24V |
|
| Size |
320 * 320 * 280 |
L×W×H |
| Weight |
12 Kg |
Wiggler included |
| Moving |
Four-wheel drive |
Rubber wheels |
| Travel speed |
0∼880mm/min |
|
| Oscillating motor |
DC24V 18RPM |
|
Range of torch adjustment
Range of torch adjustment |
Up and down |
|
| Front and back |
85mm |
| Operating Angle adjustment range |
360 ° |
| Make the Angle adjustment range |
0 ° |
| Control |
Operating functions |
Swing mode selection |
|
| Oscillating velocity |
0-10RPM (indicated with scale) |
| Swing range |
0-±10° (indicated with scale) |
| Left-right residence time adjustment |
0-2S (shown with scale) |
| Center move |
0 to + 8 ° |
| Tap the wire feed |
|
| Walk start/stop |
|
| Welding current/voltage control |
|
| Travel direction selection |
|
| Walking speed adjustment |
0 to 1000mm/min (shown on a scale) |
| Solder/non-solder selection |
|
1.Q:Are you a factory or trading company?
A, Yes we are the trading company,but we have a lot of factories that have cooperative relationships, and we can get the best plan and price for you.
2.Q:Does the machine have CE certificate?
A:Yes, others certifications also can be sent
3.Q:What's the shipping method?
A: International express and sea transportation,Depend on customer.
4.Q:Can I use my own forwarder to transport the products for me?
A:Yes, if you have your own forwarder in China, you can let your forwarder ship the products for you.
5.Q:What's the Payment method?
A:T/T,L/C and other payment method, Depend on customer.
6.Q: What is our payment term?
A:We can accept the payment by T/T and Trade assueance .
7.Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine.
8.Q: How can I know your machine works well?
A: Before delivery, we shall test the machine working condition for you.And we warmly welcome you to China for inspection.
9.Q:How to Place an order?
A:Please kinldy send us your order by email,we will confirm the PI with you .we wish to know the below:your details address,phone/fax number,destination,transportation way ;Product informaiton:item number,size,quantity,logo,etc.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}