| Customization: | Available |
|---|---|
| Cooling Way: | Air Cooling |
| Shielding Gas: | Carbon Dioxide |
|
Still deciding? Get samples of US$ 1350/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CO 2 welding is widely used in automatic car ships, bridges, locomotives, steel, petrochemical and other industries, suitable for welding a variety of welded structures, such as: strengthening the tendon plate, ribs, cross-site welding, welding box beam, and so on. The main advantages are:
Features
1. YHB-FL flat flange annular angle welding machine is suitable for various annular angle seam welding, and a wider weld can be obtained in one welding.
2. The swing speed, swing amplitude, center position and left and right dwell time can be adjusted, suitable for various specifications of welds.
3. Small size, light weight, easy installation and movement, unskilled workers can also weld.
4. Simple and fast positioning
5. Positioning by the center of the inner hole, suitable for a minimum inner diameter of 80MM
Main body components: welding gun oscillator, slider, welding gun handle, control box, control panel and other accessories
1. Driving part: The power device for the trolley to move, composed of four rubber wheels and bevel gears, chains, and sprockets
2. Welding gun clamp: The clamping device of the welding gun can adjust the angle of the welding gun.
3. Oscillator: Drives the welding gun to perform pendulum-style swing welding
4. X-Y slider part: A device for adjusting the position of the welding gun, which can be fine-tuned forward and backward during welding
5. Welding gun fixing frame: Fixes the welding gun tube
6. Control box; can adjust all the movements of the trolley, refer to the control panel operation method for details
7. Manual center positioning: used for positioning the machine and the inner hole, loosen to the left and tighten to the right.
(1) "Welding/non-welding" switch: When the "welding" position is selected, the machine enters the welding preparation state and presses the "start" switch to start welding. When the "non-welding" position is selected, press the "start" switch and the trolley will only move but will not weld.
(2) Start" switch: When the switch is turned on, the trolley starts to move. If the "welding/non-welding" selection switch is in the "welding" position, welding starts; if the "welding/non-welding" selection switch is in the "non-welding" position, only the trolley moves but no welding is performed.
(3) Stop" switch: If you press the stop switch during the trips of the car, all the actions will stop.
(4) Up Down: You can choose to walk up or down.
(5) Walking speed: The speed value is displayed in LED digital, the maximum walking speed is 1040mm/min, and the digital display value is 100.
(6) swinging speed: Rotate swinging speed in clockwise, displayed with LED, the maximum value is 99.
(7) Swing range: The amplitude of rotating swing clockwise, displayed with LED, the maximum value is 99. The widest swing is 35mm
(8)left stop time: The adjustment range is 0-2.5s, which increases clockwise.
(9)right stop time: The range is 0-2.5s, which increases clockwise.
(10) Center mobile adjustment knob: When rotating clockwise, the center will move to the right. When rotating counterclockwise, the center will move to the left. The adjustment angle is 360 °.
(11) Select the knob of swing mode: Use this knob to select the swing mode. There are five types of swing mode of the car. Except for the first one is the non -swing mode, the rest are as follows.
| project | content | Remarks |
| source | AC220V or DC24V | Optional lithium battery power supply |
| size | 400*300*300 | L * W * H unit MM |
| weight | 13KG | Including swinging device |
| Driving method | Four wheel drive | Rubber wheels |
| structural style | portable | Self suction |
| Walking speed | 0-999MM/MIN | |
| Welding torch adjustment range | Up and down | 60mm |
| around | 80mm | |
| Operating angle adjustment range | 360 ° | |
| Perform angle adjustment range | ± 45 ° | |
| Swing parameters | Swinging angle | 0- ± 8 ° |
| Maximum swing speed | 0-40 weeks/minute | |
| Left and right dwell time | 0-2.5S | |
| Swinging mode selection | ||
| Applicable inner diameter | 80-600MM | |
Q1:Is your company a trading one or a factory?
A:Factory and trade (we have our own factory site.)
Q2:How many years have you been producing welding equipment? A:We have been in this industry for more than 10 years
Q3:Which payment terms are you accepted?
A:T/T Q4:When to deliver the goods after the order is placed?
A:It depends on the quantity of the products. Generally we can arrange shipment after 15 to 20 days.
Q5. Does your company accept customization? We have excellent design team, and we accept OEM.
Q6.:What's the shipping method?
A: International express and sea transportation,Depends on the customer
Q7: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine.
Q8: How can I know your machine works well?
A: Before delivery, we shall test the machine working condition for you.And we warmly welcome you to China for inspection.
){kind=link}