Fillet Weld Boat Welding Secondary Welding Machine Ka-H4

• Customization: Available
• Cooling Way: Air Cooling
• Control: Automatic
• Model NO.: KA-H4/2
• Style: Portable
• Electric Current: AC
• a Fixed Way: Magnetic Attraction
• Walking Speed: 0-1000mm
• Weight: 16kg
• Welding Form: Ring Seam Butt Joint
• The Main Material: Aluminum Alloy
• Transport Package: Export Package
• Specification: 340 * 460 * 290
• Trademark: yuehongbo
• Origin: China
• HS Code: 84688000
• Production Capacity: 100000

Product Description

Product Description

CO2 welding automatic trolleys are widely used in ships, bridges, locomotives, steel structures, petrochemicals and other industries. They are suitable for welding a variety of welding structures, such as: welding of stiffened plates, ribs, intersections, welding of box beams, etc. wait. Its main advantages are:

1. Reduce labor intensity and improve the working environment.
2. Improve work efficiency, which is 1.5 times that of manual welding.
3. Avoid poor weld quality caused by human factors. Generally, the defective rate of manual operation is about 20%. , and the use of automatic welding trolleys has no welding defect rate, so its comprehensive benefits are nearly 200% higher than manual welding.
4. High degree of automation, ensuring the stability of welding quality.
5. No need for very skilled technical workers.

The KA-H4 double-sided angle welding car is designed to adapt to double-sided welding. It can not only perform double-sided welding of the same welding seam, or simply weld symmetrical welding to reduce the deformation of the workpiece.
 
Features                                             
(1) KA-H4 is a horizontal double-sided angle welding automatic device
(2) The automatic stop sensor is installed on both sides of the car, and automatically stops after welding
(3) One or double -sided welding can be performed and the height of the car is adjusted according to the height of the workpiece.
(4) Use both sides to welded at the same time to avoid deformation of general single -sided welding
(5) Simple movement and operation, non -skilled workers can also weld

Product Structure Introduction

1. The body part: X-Y block, sensor, handle and other attachments composed
2.Drive part: The device of the driver's car part is composed of rubber wheels, oblique gear, chain, sprocket wheels, spindle, etc.
3.Welding torch 1 adjust the slider: adjust the welding tool 1 position device. In the welding, you can also use the handle, lower, left, and the right to fine -tune
4. Welding torch 2 adjust the slider: adjust the location of the welding gun 2
5. Welding torch fixing rack: The device of fixed welding gun is used in order to check and adjust the design and production of the convenient welding gun.
6.Guide wheel part: walk along the welding workpiece, accurately guide the welding site
7.Control box: Control all the movements of the car, refer to the control panel operation method for details

Control introduction

1. Walking start switch: The switch is turned on and the car starts to walk
2.Walking stop switch: If the car is walking, if the stop switch is pressed and switch, all the action will be stopped
3. Walking direction select switch: choose to walk to the left or right
4.Walking speed: adjust the car to walk speed knob, increase clockwise
5.NO.1 Welding/non -welding: NO.1 Welding/non -welding selection switch of welded torch, press the switch when placed in a non -welding position, only walking and not welding in the car
6. NO.2 welding/non -welding: NO.2 Welding/non -welding selection switch of welding guns, press the switch when placed in a non -welding position, only walking and not welding in the car
 

Product Parameters

 

Projects		Content	remark
Buggy	Power supply	24~220V		AC
	Size	340 * 460 * 290		L×W×H
	Weight	11Kg
	Drive	Four-wheel drive		Rubber wheels
	Walking speed	0 to 960 mm /min		Denoted by scale
	Welding gun adjustment range	Up and down		40mm
		Front and rear		40mm
		Job Angle adjustment range		Plus or minus 45
		Make the Angle adjustment range		360^.
Control box	Operating function	Power light
		Start of walk
		Walking stops
		Walking direction selection		Left or right
		Travel speed regulation		Increase clockwise
		No.1 Welding/non-welding options
		No.2 Welding/non-welding options

On-Site Usage

Company Profile

FAQ

1.Q:Are you a factory or trading company?
A, Yes we are the trading company,but we have a lot of factories that have cooperative relationships, and we can get the best plan and price for you.

2.Q:Does the machine have CE certificate?
A:Yes, others certifications also can be sent

3.Q:What's the shipping method?
A: International express and sea transportation,Depend on customer.

4.Q:Can I use my own forwarder to transport the products for me?
A:Yes, if you have your own forwarder in China, you can let your forwarder ship the products for you.

5.Q:What's the Payment method?
A:T/T,L/C and other payment method, Depend on customer.

6.Q: What is our payment term?
A:We can accept the payment by T/T and Trade assueance .

7.Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine. 

8.Q: How can I know your machine works well?
A: Before delivery, we shall test the machine working condition for you.And we warmly welcome you to China for inspection.

9.Q:How to Place an order?
A:Please kinldy send us your order by email,we will confirm the PI with you .we wish to know the below:your details address,phone/fax number,destination,transportation way ;Product informaiton:item number,size,quantity,logo,etc.