Automatic Welding Tractor for I-Beam and T-Plate Fillet Welding

• Customization: Available
• Type: Welding Trolley
• Structure: Aluminum Alloy Processing
• Model NO.: KA-H1/2
• Rotaion Speed: 0-1000mm
• Voltage: 110V/220V
• Condition: New
• a Fixed Way: Magnetic Attraction
• Welding Form: Ring Seam Butt Joint
• Walking Speed: 0-1000mm
• Weight: 10kg
• Applicable Materials: Carbon Steel
• Walking Style: Four-Wheel Drive
• Track Material: Highly Elastic Stainless Steel Belt
• Transport Package: Export Package
• Specification: 300*240*280
• Trademark: yuehongbo
• Origin: China
• HS Code: 84688000
• Production Capacity: 100000

Product Description

Product Description

CO2 welding automatic trolleys are widely used in ships, bridges, locomotives, steel structures, petrochemicals and other industries. They are suitable for welding a variety of welding structures, such as: welding of stiffened plates, ribs, intersections, welding of box beams, etc. wait. Its main advantages are:

1. Reduce labor intensity and improve the working environment.
2. Improve work efficiency, which is 1.5 times that of manual welding.
3. Avoid poor weld quality caused by human factors. Generally, the defective rate of manual operation is about 20%. , and the use of automatic welding trolleys has no welding defect rate, so its comprehensive benefits are nearly 200% higher than manual welding.
4. High degree of automation, ensuring the stability of welding quality.
5. No need for very skilled technical workers.

KA-H1 is an automatic trolley for magnetically controlled fillet welding, which is widely used. Its outstanding features are small size, light weight, easy to move, simple to use, and suitable for horizontal fillet welding.

Features:      

1. KA-H1 trolley is an automatic welding device suitable for horizontal fillet welding.
2. It can realize welding in both left and right directions. There are induction stop switches installed at both ends of the trolley. The trolley can automatically stop after the welding is completed, making it easy for one worker to operate multiple pieces of equipment at the same time.
3. Small size, light weight, easy to move and install, and unskilled workers can also weld.
4. A permanent magnet is installed to prevent the car from breaking away from the welding line.
5. Can be installed on a vertical surface for welding.

Product Structure Introduction

 

Composition description
 Body: X-Y slider, guide wheel, induction stop switch, welding gun handle, and other accessories

1. Driving part: It is the device that drives the trolley, consisting of four rubber wheels, bevel gears, chains, and sprockets
2. X-Y slider: It is a device for adjusting the position of the welding gun. It can be finely adjusted up, down, left and right during welding.
3. Welding gun clamp: It is a device for fixing the welding gun. It is convenient for disassembly of the welding gun during maintenance and adjustment.
4. Guide wheel: Rolls along the surface of the base material. , a device that guides the accurate welding part
5. Handle: Convenient for installing and moving the trolley
6. Control box: All movements of the trolley can be adjusted, please refer to the "Control Panel Instructions" for details

7) Magnet: Installed with a permanent magnet to avoid the trolley being detached Welding line phenomenon.

 

Control introduction

1.Power plug: Connect to AC220V input.
2.Welding/non-welding selector switch: It is the welding/non-welding    selector switch of the welding gun. After selecting non-welding and pressing the travel switch, only the trolley will move without welding;
3. Welding gun control line.
4. LED display light: can display walking speed, arc starting/ending time.
5. Walking speed: clockwise rotation speed increases.
6.Start walking: Turn on the switch and the car starts walking;
7.Stop walking: If you press the stop switch while the car is moving, the car will stop all movements;
8.Walking direction selection switch: You can choose to walk left or right;

Product Parameters

 

 

Type		Content	Remarks
Buggy	Power source	220v
	Size	300 * 230 * 280	L×W×H
	Weight	7.5Kg
	Moving	Four-wheel drive	Rubber wheels
	Walking speed	0∼99cm/min	Mark with scale
	Range of torch adjustment	Up and down	±20mm
		anteroposterior	±20mm
		Operating Angle adjustment range	Plus or minus 45 °
		Make the Angle adjustment range	Plus or minus 10 °
Controls	Operating functions	LED digital display
		Start of walk
		Walking stops
		Choose walking direction	Left and right
		Adjust walking speed	Mark with a scale
		Select welded/non-welded

Application Conditions

 

Company Profile

 

FAQ

1.Q:Are you a factory or trading company?
A, Yes we are the trading company,but we have a lot of factories that have cooperative relationships, and we can get the best plan and price for you.

2.Q:Does the machine have CE certificate?
A:Yes, others certifications also can be sent

3.Q:What's the shipping method?
A: International express and sea transportation,Depend on customer.

4.Q:Can I use my own forwarder to transport the products for me?
A:Yes, if you have your own forwarder in China, you can let your forwarder ship the products for you.

5.Q:What's the Payment method?
A:T/T,L/C and other payment method, Depend on customer.

6.Q: What is our payment term?
A:We can accept the payment by T/T and Trade assueance .

7.Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine. 

8.Q: How can I know your machine works well?
A: Before delivery, we shall test the machine working condition for you.And we warmly welcome you to China for inspection.

9.Q:How to Place an order?
A:Please kinldy send us your order by email,we will confirm the PI with you .we wish to know the below:your details address,phone/fax number,destination,transportation way ;Product informaiton:item number,size,quantity,logo,etc.